Alignment jobs rarely need only one thing. A pump base may need shims and a machined adaptor, and a fixture may need spacing plates and precision-cut parts. Working with a CNC precision machining company that also supplies shims can simplify both. These four scenarios show how Genesis-MFG's CNC and shim offerings fit together.
Scenario One: Aligning a Pump and Motor Base
Pump and motor bases are the classic shim application. Genesis-MFG's shim page lists pumps, motors, compressors, gearboxes and fans under machinery alignment. For a base that must be shimmed without lifting the machine, slotted shims help. They are pre-cut with a U-shaped slot, so they slide around bolts without removing the equipment. Shim kits with assorted thicknesses suit alignment teams that need to try several values on the spot.
Plan the order before you start. Measure the gaps, note the bolt positions and decide whether you want sheets to cut yourself or ready-cut pieces. When you look for shim stock UAE suppliers hold locally, ask about stock and production in Sharjah, since local supply means you are not waiting on imports.
Scenario Two: Outdoor and Marine Equipment
Corrosion changes the material choice. Stainless steel 304 and 316 resist corrosion, which is why the page recommends them for marine, offshore and outdoor equipment. Marine work also appears on the application list as engine and shaft alignment. Carbon or spring steel suits general machinery alignment, and brass is non-sparking and easy to cut, which suits electrical and precision equipment.
Laminated, or peelable, shims help when you do not know the final thickness in advance. They are bonded layers that peel off to adjust thickness on site. Special alloys can be made on request, and material certificates are available on request, so ask for the certificate when the environment is demanding.
Scenario Three: Fixtures and Machine Tool Set-Up
Manufacturing plants use shims for machine tool set-up and fixture spacing. Custom shim plates are cut to your drawing by laser, waterjet or CNC, with holes, slots and any outline. Every shim is deburred so it sits flat, and the thickness is marked for easy identification.
The fixtures themselves may need machining. A precision machining company chooses the process by the part's shape and material: a cylindrical part suits a CNC lathe, while parts with different geometries call for other precision processes. For a quote, send:
-
A blueprint with CAD or CAM programs
-
The list of materials, the quantity and finish requests, if needed
-
3D files, preferably STEP, IGES or XT
-
2D drawings in PDF, including tolerances and dimensions
A typical CNC machine holds ±0.005 in. (0.13 mm), and precision machining can reach ±0.002 in. (0.051 mm) down to ±0.0002 in. (0.005 mm), depending on material and geometry.
Scenario Four: Oil and Gas Skids and Rotating Equipment
The shim page lists rotating equipment, skids and wellhead assemblies under oil and gas, and turbines and generators under power generation. These jobs often run to a shutdown schedule. Genesis-MFG handles any quantity, from a single custom shim to large shutdown orders, and says urgent orders for shutdowns and breakdowns can be prioritised. Delivery runs from Sharjah to Dubai, Abu Dhabi, Ajman, Ras Al Khaimah and across the UAE.
Ask for the paperwork up front:
-
ISO 9001-certified quality management, as listed on the shim page
-
Material certificates on request
-
Approved drawings kept on file for repeat orders
Choosing a CNC precision machining company that also supplies shims keeps machined parts and shims on one schedule.
Conclusion
Each scenario comes down to the same steps: measure the job, choose the format and material, state tolerances and ask for certificates. For alignment work, review shim stock UAE suppliers on stock, material range and delivery, as you would for machining. Genesis-MFG's shim stock page lists its formats, materials and delivery areas, and a drawing or list of dimensions is enough to request a quote.
FAQs
1. What is the difference between shim stock and slotted shims?
Shim stock is sheet or roll material that you cut yourself. Slotted shims are pre-cut with a U-shaped slot, so they fit around bolts without lifting the machine.
2. Which shim material suits marine equipment?
Stainless steel 304 and 316, which resist corrosion in marine, offshore and outdoor equipment.
3. Can urgent orders be prioritised?
Genesis-MFG says urgent orders for shutdowns and breakdowns can be prioritised.
4. Does Genesis-MFG supply shim stock UAE customers can use for shutdowns?
Yes. It handles any quantity, from a single custom shim to large shutdown orders, and delivers across the UAE.
